Have a look at the following standard considerations when you are designing a piece which needs to be manufactured by each process:

Stereolitography (SLA)

Minimum wall thickness of material: 1 mm

Air gap: 0,5 mm

When you print mechanical systems, please consider the indicated air gap.

We must ensure that this situation would not happen.

Embossing: Minimum Deep: 0.5 mm / Minimum Width: 0.2 mm

Hole flow / Minimum diameter: 8mm

In the case of hollow parts, the support material has been added inside it. The part must have at least one hole flow with the minimum diameter value. A bigger part would need more number of holes and / or its diameter has to be bigger.

Note: You can create gaps to minimize the effect of these holes on the aesthetic / part functionality.

Service Details

Max Build Volume: 380×380×250mm

Max Build Tolerance/ Precision: 0.025 -0.05mm

Max Build Available materials: Visijet SL Flex; Visijet SL Clear

Max Build Minimum order amount: No

Max Build Base fixed cost per build: None

Max Build Parts are quoted by: Build Volume + Support structure volume + Machine hours

MovingLight ® DLP

This technology of 3D print is ideal for small, precise, detail-rich parts and casting patterns such as jewelry, electronic components and dental wax-ups. Our machine can prints 30 micron layers at a 585 dpi resolution resulting from fine feature-details reflecting true-to-CAD accuracy.

Service Details

Max Build Volume: 43x27x150 mm

Max Build Tolerance/ Precision: 0.056mm

Max Build Available materials: VisiJet FTX Green

Max Build Minimum order amount: No

Max Build Base fixed cost per build: None

Max Build Parts are quoted by: Build Volume + Support structure volume + Machine hours

Polyjet

Minimum wall thickness of material: 1 mm

Digital ABS: 2 mm

Air gap: 0,5 mm

When you print mechanical systems, please consider the indicated air gap.

We must ensure that this situation would not happen.

Embossing: Minimum Deep: 0.5 mm / Minimum Width: 0.2 mm

Hole flow / Minimum diameter: 10mm

Note: In the case of hollow parts, the support material has been added inside it. The part must have at least one drain hole with the diameter value. A bigger part would need more number of holes and / or its diameter has to be bigger.

Service Details

Max Build Volume: 500x400x200 mm

Max Build Tolerance/ Precision: 0.016mm

Max Build Available materials: Digital ABS, Vero White and Black (rigid opaque), Tango Black; TangoPlus (rubber-like), Durus Black (Polypropylene-like), Dental-Biocompatible

Max Build Minimum order amount: No

Max Build Base fixed cost per build: None

Max Build Parts are quoted by: Build Volume + Support structure volume + Machine hours

3D Color Prints

Minimum wall thickness of material: 1 mm

Air gap: 0,6 mm

When you print mechanical systems, please consider the indicated air gap.

We must ensure that this situation would not happen.

Embossing: Minimum Deep: 0.2 mm / Minimum Width: 0.2 mm

Minimum diameter hole 1:4mm / 2 or more holes: 2 mm

Note: In the case of hollow parts, dust can be accumulated in the inner part. So In the part, you must have at least one hole flow with the minimum diameter value. A bigger part would need more number of holes and / or its diameter has to be bigger. If your part has more than one hole, you can reduce the diameter to half.

Service Details

Max Build Volume: 203x254x203 mm

Max Build Tolerance/ Precision: 0.1mm

Max Build Available materials: Visijet C4 Spectrum with up to 1 million colors

Max Build Minimum order amount: No

Max Build Base fixed cost per build: None

Max Build Parts are quoted by: Build Volume + Support structure volume + Machine hours

If you have any questions, please do not hesitate to contact us.